XM430-W210-T

SKU:
$0,00

DYNAMIXEL-X

DYNAMIXEL-X It is a high-performance networked actuator, which has been widely used to build multi-joint robots with reliability and expandability.

Functions

  • Exclusive intelligent robot actuator with fully integrated DC motor + reduction gear + controller + driver + network in a compact DC servo module.
  • Sophisticated control architecture: Multiple methods
    feedback and control (6 operating modes, PID gain control, profile control, data feedback)
  • Compatible with multiple environments
    development (SDK, source code, libraries, GUI-based software)
DESCRIPTION

DYNAMIXEL-X

DYNAMIXEL-X It is a high-performance networked actuator, which has been widely used to build multi-joint robots with reliability and expandability.

Functions

  • Exclusive intelligent robot actuator with fully integrated DC motor + reduction gear + controller + driver + network in a compact DC servo module.
  • Sophisticated control architecture: Multiple methods
    feedback and control (6 operating modes, PID gain control, profile control, data feedback)
  • Compatible with multiple environments
    development (SDK, source code, libraries, GUI-based software)
SPECS
Stall torque [Nm] No-load speed [rpm] Voltage [V] Dimension [mm] Weight [g]
0.92
65.0
11.1 20.0 x 34.0 x 26.0 23.0

Model name XM430-W210-T
Series DYNAMIXEL X
MCU ARM Cortex-M3 (72 [Mhz], 32 [bit])
Input voltage Min. [V] 10.0
Recommended [V] 12.0
Max. [V] 14.8
Performance characteristics Voltage [V] 12.0
Loss torque [N m] 3.00
Leakage current [A] 23
No-load speed [rpm] 77.0
No-load current [A] 0.07
Continuous operation Voltage [V] -
Torque [N·m] -
Speed ​​[rpm] -
Current [A] -
Resolution Resolution [degrees/pulse] 0.0879000000
Step [pulse/rev] 4,096
Angle [degree] 360
Position sensor Contactless absolute encoder (12 [bit], 360 [degree])
Manufacturer: ams(www.ams.com), Part No.: AS5045
Operating temperature Min. [°C] -5
Max. [°C] 80
Engine Coreless
Speed Min. [pb] 9,600
Max. [bps] 4,500,000
Control algorithm PID
Gear type Spur
Gear material Metal
Case material Metal (front, middle) Engineering plastic (back)
Dimensions (width x height x depth) [mm] 28.5 x 46.5 x 34.0
Dimensions (width x height x depth) [inches] 1.12 x 1.83 x 1.34
Weight [g] 82.00
Weight [oz] 2.89
Transmission ratio 212.6 : 1
Reaction [arcmin] -
Backlash [degrees] -
Command signal Digital package
Protocol type Half-duplex asynchronous serial communication (8 bits, 1 stop, no parity)
Link (physical) TTL level multidrop bus
ID 0 ~ 252
Feedback Position, speed, current, real-time tick, trajectory, temperature, voltage, etc.
Protocol version Protocol 1.0
Protocol 2.0 (default)
Operating mode / angle Current control mode: spin
endless Speed ​​control mode: spin
endless Position control mode: 360 [degrees]
Extended position control mode: ±256 [rev]
Current-based position control mode: ±256 [rev]
PWM control mode: endless rotation
Output [W] -
Standby current [mA] 40

Dibujo

Dibujo

Dibujo

Cautela


Conjunto de cables de la serie DYNAMIXEL-X a través de una caja hueca Organice el cable enredado antes de ensamblar la carcasa posterior. No monte la carcasa trasera con el cable enredado. El cable enredado puede ser aplastado por la carcasa y causar un error de comunicación. Si usa dos cables a través de la caja hueca, los cables se dañarán. Utilice solo un cable a través de la carcasa hueca. La serie DYNAMIXEL-X adoptó un nuevo conector JST chapado en oro para una comunicación segura y confiable. El conector utilizado para el Dynamixel anterior es Molex. Para controlar los actuadores de la serie DYNAMIXEL-X a través de OpenCM o USB2Dynamixel, utilice el cable convertible JST-Molex incluido en el paquete.


Sin embargo, el cable convertible Molex-JST NO está incluido en el modelo XL430. Compre un cable convertible cuando utilice un controlador y una interfaz que admita el conector JST.

Dibujo

DO NOT DELETE

Streamlined body design with collision detection for safer operation. Equipped with an indicator ring to make it easy to monitor the Magician E6's operating status.